SIMULATION OF BLOCK CODES HAMMING AND CYCLIC CODES - welcome to our blog that presents the full content How Gadget, the discussion this time we're discussing that you find that SIMULATION OF BLOCK CODES HAMMING AND CYCLIC CODES, we have provided complete information with images that are easy to understand, the explanation is simple but complete, therefore please read until the end :)

This is about : SIMULATION OF BLOCK CODES HAMMING AND CYCLIC CODES
And this article : SIMULATION OF BLOCK CODES HAMMING AND CYCLIC CODES

SIMULATION OF BLOCK CODES HAMMING AND CYCLIC CODES

SIMULATION OF BLOCK CODES

AIM

To simulate linear block coding techniques for hamming and cyclic code using MATLAB.

THEORY

HAMMING CODES

Consider a family of (n,k) linear block codes that have the following parameters.

Block length,n=2^m-1

No.of.message bits k=2^m-m-1

No. of parity bits, n-k=m, where m>=3.

These are so called Hamming codes. To illustrate the relations between the minimum distance dmin and the structure of the parity check matrix H. Consider the codeword 0110100,In the matrix multiplication is done, and the non-zero elements of this codeword “shift” out the second, third and fifth column of the matrix if yielding. An important property of hamming codes is that they satisfy the condition. t=1.This means that hamming codes are single error correcting binary perfect codes.

CYCLIC CODES

Cyclic codes form a sub class of linear block codes.A binary code is said to be cyclic code,if it exhibits two fundamental properties.

1. LINEARITY PROPERTY

The sum of two codeword is also a codeword.

2. CYCLIC PROPERTY

Any cyclic shift of codeword is also called a codeword.

ALGORITHM

HAMMING CODE

STEP 1: Start the program

STEP 2: Assign the number of parity bits m=4

STEP 3: Calculate the block length n from m=2^m-1

STEP 4: Assign the number of message bits k such that n-k=m so k=11

STEP 5: The hamming code is (5,11)

STEP 6: Obtain the input signal message randomly the input message is in binary format

STEP 7: The parity bits are calculated for input message taken.

STEP 8: The parity bits are appended along the message bit to form the codeword.

STEP 9: The codeword formed is transmitted through AWGN channel

STEP10: The received signal is then decoded to retrieve the message

STEP 11: The BER is calculated for the retrieved message

STEP 12: For the various values of the SNR and its corresponding BER,the graph is

Plotted.

CYCLIC CODE

STEP 1: Start the program.

STEP 2: Assign the block length n=7.

STEP 3: Assign the message bits,k=4.

STEP 4: The cyclic code is (7,4)

STEP 5:Generate the polynomial.

STEP 6: Obtain the input message randomly.

STEP 7: The input message is in binary format.

STEP 8: The codeword is formed by appending the parity bits with the message bits.

STEP 9: The parity bits are calculated from the generation polynomial.

STEP10: The codeword formed is transmitted through AWGN channel.

STEP11: The received signal is then decoded with the help of generator polynomial

      Knowledge to retrieve the message.

PROGRAM

HAMMING CODE 

####################################

clc;

clear all;

close all;

m=4;

n=2^m-1;

k=11;

berf=[];

for i=1:10

    b=0;

    for j=1:50

        msg=randint(500,k,[0,1]);

        code=encode(msg,n,k,'hamming/binary');

        t=0:0.1:10;

        snr=0;

        y=awgn(code,i);

        y(find(y>0))=1;

        y(find(y<0))=0;

        msgop=decode(y,n,k,'hamming/binary');

        [number,b1]=biterr(msgop,msg);

        b=b+b1;

    end

    berf(i)=b/50;

end

semilogy(1:10,berf);

title('performance analysis in awgn for hamming codes');

xlabel('snr(db)');

ylabel('BER');

#######################################################################

CYCLIC CODES

clc;

clear all;

close all;

n=7;

k=4;

genpoly=cyclpoly(n,k,'max');

berf=[];

for i=1:10

    b=0;

    for j=1:50

        msg=randint(500,k,[0,1]);

        code=encode(msg,n,k,'cyclic/binary',genpoly);

        t=0:0.1:10;

        snr=0;

        y=awgn(code,i);

        y(find(y>0))=1;

        y(find(y<0))=1;

        msgop=decode(y,n,k,'cyclic/binary',genpoly);

        [number,b1]=biterr(msgop,msg);

        b=b+b1;

    end

    berf(i)=b/50;

end

semilogy(1:10,berf);

title('performance analysis in awgn for cyclic codes');

xlabel ('snr (db)');

ylabel ('BER');

#########################################################

RESULT

Thus the linear block coding technique for hamming code and cyclic code has been simulated using MATLAB.

Information SIMULATION OF BLOCK CODES HAMMING AND CYCLIC CODES has been completed we present

A few of our information about the SIMULATION OF BLOCK CODES HAMMING AND CYCLIC CODES, we hope you benefit from this article

You have just read the article SIMULATION OF BLOCK CODES HAMMING AND CYCLIC CODES and many articles about gadget in our blog this, please read it. and url link of this article is https://howtomonetizeeverything.blogspot.com/2013/12/simulation-of-block-codes-hamming-and.html Hopefully discussion articles on provide more knowledge about the world of tech gadgets.

Tag :

Tweet